“Der Jorge’s world”
On this page you will find information about handicraft, own creations and much more…
Our “isolation chamber” – update
Today we tried the new feature of our isolation chamber. The inhaled and exhaled air passes the bubbler bottles. We got the bottles as a gift from our friend JG-Leathers. This setup makes breathing – depending on the amount of water in the bottles – more difficult and gives a optical and acoustical feedback regarding the respiration of the person inside the chamber. Here is a short video showing our test. The isolation chamber will be a very interesting part of our upcoming movie. Of course, Takattum will be accordingly dressed and properly secured inside the chamber. I replace the gas mask’s original glass by a custom formed and shaped fresnel-lens. Therefore Takattums’s eyes look quite large and a bit distorted. Using a fresnel-lens, the wearer of the mask has a very distorted sight, everything looks blurry and is not able to get a feeling for distances. Please enable JavaScript Best regards Der...
read moreThe “Chastity Shell”
A “Chastity-Suit” made of fibre-glass. A project from 2008 to 2010 From the mold to the raw shell The shell after demolding and the locking mechanism in an early stage After grinding, another layer of primer, the surface is getting smoother and smoother… First fitting of the shell with a preliminary locking mechanism. The surface is still white, but will be high-gloss black when finished. The first stainless steel parts have been glued to the shell. Almost done! The final...
read moreOur “isolation chamber”
I waited almost 40 years and now one of my dreams has come true. Since I was a child, I was fascinated by this little corner in my parent’s cellar. I always thought, that this corner would be perfect for a cell and now, decades later, here it is. I started to build this cell in autumn 2013 for a chapter of our new video „Dunkelziffer“. This chapter starts with me, walling up the window. The cell is isolated against the surrounding walls and floor with 60 mm high density foam. The inner walls are made out of 19 mm OSB panels. Later we realized that Takattum did not need to grind the OSB panels ;-). After grinding, the panels were painted but the result was not very attractive. At the upper part of the picture you see several pipes for air supply, electrical wiring and some spare pipes for future extensions. The painted walls were coated with PVC covering. Here is a picture showing the possible interior. Meanwhile the door is finished too. What’s still missing? A matching gas mask with two connections for air supply. The pipes for air supply have to be extended and isolated; perhaps I will connect them to JG-Leather bubbler column. A panic button for security. And for the near future: a small surveillance camera, perhaps capable of using infrared lightning. I will keep you up to...
read moreMy workshop
This is a little peek into my chaotic workshop. It has 90 square meters. Here I can work in peace and quietness on my new projects. Currently I am working on a new stainless steel harness for Takattum. The whole thing is still in an early phase of development. Here are a few pictures to give you a first impression. The breast cups are made out of stainless steel spheres, usually used as pond decoration. As usual, I use the tailor’s dummy as a patient stand-in for the fitting of the parts. The different parts are provisionally attached, the current focus lies on the proper placing and shapes of the steel...
read moreThe “Pleasure Suit”
A quite old project (2007) The good old taylor’s dummy is on duty again… The finished pattern for the bodice The bodice, glued and sewed together but still a bit ‘naked’ and boring… Yeah, it is getting a bit more interesting now… A close-up of important parts … The ‘breast cups’ – not yet attached to the suit Wait a minute, there are 3 electric motors left… But before dealing with the spare motors, let’s finish the breast cups first… A view of a cup’s inside – still without the vibrator’s protection cap The to date most difficult part – glueing the caps to the bodice – has been done successfully! A view of the cups with cables and hoses, today the small vac-pump arrived. It is time to think about an appropriate placing of the remaining motors! Inflatable, vibrating plugs are available off the shelf, but you’ll hardly find one with a 12V-motor … Finally, the two parts of the plug are glued together – another ‘active’ part is ready! The small diaphragm pump is able to inflate the plug within seconds to its desired size As I will use only 4 vibrators for the completed suit, the 5th channel will drive this pump … The second, a bit larger pump, for the breast cup vacuum – not yet mounted The pump’s original design is for providing compressed air only – not for vacuum The pump’s air-tight enclosure with the 2 hose fittings – one for “suck” and one for “blow” The pneumatic work is finished! 🙂 The backback houses all the pneumatic and electrical stuff including the rechargeable battery pack A small meal just before the first fitting of the suit and backpack The first fitting, the backpack is attached to an outer bodice with cut-outs for the breast cups The suit’s control panel attached to the upper arm. The complete outfit as worn at the BoundCon presentations. Since 2007 the pleasure suit’s back pack has been modernized a couple of times, the batteries have been replaced by significantly smaller ones, the pumps have been replaced as well and some additional features have been added. You can find some newer pictures at the various event slide shows here on our website. If you want to see the pleasure suit in action in a movie, we strongly recommend our 4th DVD, “Poor working...
read moreThe “head cage”
The “head cage” is the most poular and best known piece I’ve build till now If you are interested in its creation, please click the following link for more information. Captured_taboos_how_to1
read more
Recent Comments